Customization: | Available |
---|---|
Warranty: | 18 Months |
Type: | Four-Side Planer |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
High Precision 4 Side Planer Machine for Finger Joint Board Production 60m/min
Introduction:
VH-M718H high speed four side moulder which is 7 spindle moulder but with first two bottom planner, The rocessing of rough planing and fine planing which are carried out first to ensure the surface finish quality of the base planing. The shortest processing length is 150mm (continuous feeding), the spindle bearing adopts high precision bearing, the speed is 8500r/min, the feeding speed is up to 60M/min with the result of high processing efficiency, save the labor cost with the perfect and advantages of processing quality. It is the best choice for finger joint board industry and factories processing.
Parameters
Basic technical data |
|
Model NO. |
M718 |
Working width |
25-180mm |
Working thickness |
8-130mm |
Length of working table |
1500mm |
Feeding speed |
6-60m/min |
Spindle diameter |
40mm |
Spindle speed |
8500r/min |
Air pressure |
0.6MPa |
Motor Power |
|
1st bottom shaft |
5.5kw |
Right vertical shaft |
5.5kW |
Left shaft |
5.5kW |
1st top shaft |
7.5kW |
2nd top shaft |
5.5kW |
2nd bottom shaft | 5.5kW |
3rd bottom shaft | 4kW |
Lifting beams |
1.1kW |
Feeding |
11 kW |
Side claming motor power | 1.5kW |
The total power |
52.6kW |
Tool diameter |
|
1st bottom shaft |
125mm |
Right vertical shaft |
125-160mm |
Left shaft |
125-150mm |
1st upper shaft |
125-160mm |
2nd upper shaft |
125-160mm |
2nd bottom shaft |
125mm |
3rd bottom shaft | 125mm |
Other Parameters | |
Feeding wheel diamter |
140mm |
Overall dimension |
4500*1500*1900mm |
Dust outlet diameter |
140mm |
Machine weight |
5000kg |
Detailed Images
Four side moulder with first two bottom planers , this structure can more effectively process the relatively distorted wood in the plywood factory, enlarge the processing scope and reduce the processing cost. |
|
It should be equipped with a automatic conveyor in front of side feeder in order to save labor intensity and improve efficiency |
|
The structure of cylinder floating feed roller is adopted under the worktable to overcome the problem of rough material feeding. Speed of side feeder could be up to 60 m/min. Chain of side feeder is toothed and it allows smooth passage of wood |
|
During the processing on the side of the wood products, there are multiple groups of side pressure units to ensure that the wood close to the plate feeding processing. |
|
The front vertical plate of the left spindle and the side pressure wheel set are all compressed by pneumatic, which can flexibly adjust the pressure and equipped with auxiliary device of short material. Effective and smooth feeding of short material. |
|
The front pressing plate of the top spindle is pneumatic pressing, which is more suitable for high-speed feeding |
|
Feeding transducer,digital display,the feeding speed is up to 60M/min ,easy operation,energy saving,and increase wearing because of mechanical shifting. |
|
Matched precision bearing is adopted at the front end of the spindle, which can rotate stably at high speed. Each spindle is assembled in the dust-free constant temperature workshop. Spindle speed: 8500r/min. |
Processed effect
Package & Delivery
After passed the quality inspection, the machine will be wiped with biodegradable anti-rust oil to protect from the humid sea air. Then use PE film packaging.
Usually we use iron pallet handling equipment to the container. It can also be packaged in a fumigant-free wooden box according to customer requirements.
Pre-sale Service
· Tailored configuration solutions according to your needs.
· Customized service available.
· Free workshop layout design.
· Free visit reception service.
· Free supply chain support service.
After-sales Service
· Professional on-site installation, training and maintenance.
· Timely and efficient online and video technical support.
· Super 18 months warranty since package opened.
· Reliable lifetime spare parts support and technician service available.
Since established in 1990s years, we keep our attention on Four side moulder, Double Side Moulde, Rip saw,Optimizing cross cut saw and double end tenon machine. Depand on powerful R&D capability, strong machining capacity and high quality products and service, we have becoming a leader manufacturer in China