| Customization: | Available |
|---|---|
| Warranty: | 18 Months |
| Type: | Four-Side Planer |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Heavy Duty Six Spindles 4 Sides Moulder Machine with CE Certification for Wood Timber Processing
The machine is used for heavy cutting of heavy bamboo, hardwood lines, wooden roof beams and columns, and large square timber. Optional feeding speed 60m / min, hydraulic support bearing at the front of upper and lower shafts, touch screen upper axis left axis CNC. φ 50 spindle, powerful cutting power.
Main Feature
1.Adopt stepless speed regulation with the feeding speed of 6-36 M / min
2.Each spindle driven by an independent motor, with strong cutting force.
3.Spindle adjustment is in the front, easy to operate.
4.Electroplating countertops with good wear resistance
5.The lower initiative rollers improves the feeding effect
6.Configured Chint electrical components
7.Fully enclosed safety shield, effectively avoid sawdust flying and isolate noise
8.Pneumatic pressure type feed wheel, adjust the clamping force sectionally,
is good for smooth feeding of wood profile with different thickness
9.Configured auxiliary device for short profile to promote the smooth feed.
Parameters
| Processing capacity | |
| Model NO. | M626 |
| Working width | 25-260mm |
| Working thickness | 10-200mm |
| Length of working table | 1970mm |
| Feeding speed | 6-36m/min |
| Spindle diameter | 50mm |
| Spindle speed | 6500r/min |
| 7000Air pressure | 0.6MPa |
| Motor Power | |
| The 1st bottom shaft | 7.5kW |
| The 1st right shaft | 11kW |
| The 1st left shaft | 11kW |
| The 1st upper shaft | 11kW |
| The 2nd upper shaft | 11kW |
| The 2md bottom shaft | 11kW |
| Lifting beams | 1.1 kW |
| Feeding | 7.5Kw |
| The total power | 64.6kW |
| Tool diameter | |
| The 1st bottom shaft | 125-140mm |
| The right vertical shaft | 125-200mm |
| The left vertical shaft | 125-200mm |
| The 1st upper shaft | 125-200mm |
| The 2nd upper shaft | 125-200mm |
| The 2nd bottom shaft | 125-200mm |
| Feeding tube diameter | 140mm |
| Vacuum tube diameter | 140mm |
| Outside dimension L*W*H | 5060*2000*1900MM |
| Net weight | 4500KGS |
|
|
There are 12 groups of in-feed rollers, which are tightly arranged to allow the smooth passage of short wood pieces.There are 6 groups of supporting in-feed rollers in the working table |
| The front vertical plate of the left spindle and the side pressure wheel set are all compressed by pneumatic, which can flexibly adjust the pressure and equipped with auxiliary device of short material. Effective and smooth feeding of short material. | |
|
Two groups of discharge end increase feeding wheel, feeding force is strong, can greatly improve the feeding capacity |
| There are two groups of feeding rollers between the two upper shafts, and the large woods can pass smoothly. |
|
|
The structure of cylinder floating feed roller is adopted under the worktable to overcome the problem of rough material feeding. |
| The front pressing plate of the upper cutter shaft is pneumatically compressed, which is more suitable for high-speed feeding. |
|
|
Optional with upper and lower horizontal axis front hydraulic support. |
Processed effect
Package & Delivery
After passed the quality inspection, the machine will be wiped with biodegradable anti-rust oil to protect from the humid sea air. Then use PE film packaging.
Usually we use iron pallet handling equipment to the container. It can also be packaged in a fumigant-free wooden box according to customer requirements.
Pre-sale Service
· Tailored configuration solutions according to your needs.
· Customized service available.
· Free workshop layout design.
· Free visit reception service.
· Free supply chain support service.
After-sales Service
· Professional on-site installation, training and maintenance.
· Timely and efficient online and video technical support.
· Super 18 months warranty since package opened.
· Reliable lifetime spare parts support and technician service available.
Since established in 1990s years, we keep our attention on Four side moulder, Double Side Moulde, Rip saw,Optimizing cross cut saw and double end tenon machine. Depand on powerful R&D capability, strong machining capacity and high quality products and service, we have becoming a leader manufacturer in China
){kind=link}