| Type: | Band Saw |
|---|---|
| Power Type: | Electric |
| Layout: | Horizontal |
| Automatic Grade: | Automatic |
| Precision: | High Precision |
| Certification: | CE |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Performance advantages
1. High speed: The speed improvement of the upgraded version is 4 times that of the old version.
The new model is 4 times the old one 2-5m/min (refer to 400mm wide mahogany)
2. High precision: The upgraded version adopts high-precision and high-torque Delta servo motors, and the positioning accuracy is as high as 0.01mm, which is the same as that of traditional gantry saw asynchronous motors (0.1~0.2mm ) more than 10 times to ensure more precise sawing.
3. Environmental protection: water-free (spray) dry sawing, just vacuuming is in line with the concept of environmental protection.
(1) Reduce pollution: solve the pollution problem of waste water discharged from traditional gantry saws and water saws, and pass environmental protection acceptance.
(2) Increase the value of waste products: water sawdust is treated as waste, and dry sawdust can be sold as raw materials.
(3) Ultra-quiet design: more in line with environmental protection noise requirements.
4. Intelligence: Smart man-machine interface for mobile phone, more user-friendly operation experience.
1) 16 groups of plate thickness preset quick selection.
(2) 4 groups of high memory.
(3) 8 groups of height presets.
(4) Intelligent fixed length.
(5) Intelligent fault detection.
5. Low consumption
(1) Reduce maintenance costs and extend machine life: water-free dry sawing reduces waste water corrosion to machine tools, and the design of super heavy-duty sawing machines can expect a service life of more than 10 years. (The life expectancy of other brands of equipment is only 1-3 years)
(2) Save labor space: The production efficiency is increased by 4 times, and one person can operate it and can reach the output of four people.
(3) Save the saw blade: Under the same service life of the saw blade, increasing the speed by 4 times and outputting 4 times the finished product can produce 4 times the finished product. At the same output, the relative saw blade cost is 1/4 of the old version.
(4) Saving water and sewage treatment fees: dry sawing does not require water or spray cooling.
(5) Material saving: accurate positioning, less error, and more material saving.
This machine widely used in solid wood panel (pine, fir, oak, poplar, mahogany, etc.),with high efficiency,precision,labor-saving,material-saving,and safety.
| Machine Model | MJ3180AX900 | MJ3180AX650 | MJ41100X1300X60 |
|
Max.working size(L×W×H) |
4000×900×900mm |
4000×650×650mm |
6200×1300×1300mm |
|
Table size(L×W) |
3500×700mm |
3500×700mm |
5500×1000mm |
|
Clamp fittings |
4 |
4 |
8 |
|
Worktable infeed speed |
0.3-25m/min |
0.3-25m/min |
0.3-20m/min |
|
Worktable infeed motor |
1.5KW |
1.5KW |
1.5KW |
|
Diameter of saw wheel |
800mm |
800mm |
1000mm |
|
Saw blade speed |
31m/s |
31m/s |
25-31m/s |
|
Size of saw blade(L×W×H) |
6400×60×1.1mm |
6280×60×1.1mm |
7800×80×1.1mm |
|
Saw kerf |
1.4-2.0mm |
1.4-2.0mm |
1.4-2.0mm |
|
Saw wheel motor |
22kw |
22kw |
37kw |
|
Saw wheel elevation motor |
1kw |
1kw |
1kw |
|
Distance from saw blade to worktable |
20-850mm |
20-650mm |
20-1300mm |
|
Blade tension pressure |
70kg/cm2 |
70kg/cm2 |
80kg/cm2 |
|
Orerall dimensions(L×W×H) |
9000×2660×3000mm |
9000×2660×2800mm |
9200×3300×3500mm |
|
Net weight |
5800kg |
5200kg |
4500kg |
|
Precise positioning: high precision and high torque DELTA servo motor, the minimum resolution of positioning control is 0.01mm, which is more than 10 times of the accuracy of traditional gantry saw asynchronous motor (0.1 ~ 0.2mm); |
| Precision ball screw: φ32 Taiwan brand ABBA precision screw is used, with a lifting speed of 2 m/min; Precision guide rail: international first-line brand Germany Rexroth heavy 45 # precision guide rail, slide clearance less than 5C, stable sawing, no vibration. |
|
|
Saw wheel: adopt φ 1000*80mm high-speed saw wheel, high hardness 45 # national standard steel, through ten processes of precision processing, improve speed, wear resistance and stability, not easy to run, saw blade, saw accurately, efficiency doubled |
| Thickened worktable: the worktable is made of 10mm thick plate by full welding, with high-density ribbed plate in the middle. After heat treatment, it can prevent deformation, has good rigidity, and can withstand the impact force of 1-2T feeding, so as to ensure accurate sawing. | |
|
Heavy rail slide: 1. The 45# Heavy rail of Rexroth, an international first-line brand, is adopted. A single slide can bear 5 tons of weight. The table moves smoothly and the sawing effect is good. |
| Top quality electric components | |
|
Full automatic tension system: with the full-automatic tension function, one person can quickly replace the saw blade. The system has the function of automatic pressure maintaining. When sawing, the saw blade heats up, and the pressure is increased automatically. The saw blade is stable, and it is not easy to break or run. |
| sprinkler device: sawing heat when sawing, sprinkling device spray water on the saw blade to cool and lubricate. The saw blade is stable, and it is not easy to run saws and broken bars. Saw clip guide wheel: the alloy is used as the clip to clamp the saw blade, which will not affect the work difference due to the up and down vibration. The high-speed guide wheel can prevent the saw blade from retreating, and ensure that the saw teeth are exposed on the saw wheel. It is not easy to break the blade, run the saw and cut accurately when the two pieces are used together. |
|
|
Infrared positioning: Infrared height is used as the first trial cutting height positioning, which can be set directly on the screen without measuring with a ruler, which is convenient, fast, efficient and accurate. |
| X-axis transmission: 4-die heavy-duty precision gear teeth, properly maintained, used for 8-10 years, stable and wear-resistant, table feed stable, speed 0-35m, efficient and accurate.. | |
Pre-sale Service
· Tailored configuration solutions according to your needs.
· Customized service available.
· Free workshop layout design.
· Free visit reception service.
· Free supply chain support service.
After-sales Service
· Professional on-site installation, training and maintenance.
· Timely and efficient online and video technical support.
· Super 18 months warranty since package opened.
· Reliable lifetime spare parts support and technician service available.
Since established in 1990s years, we keep our attention on woodworking Machines. Depand on powerful R&D capability, strong machining capacity and high quality products and service, we have becoming a leader manufacturer in China
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}